人妻巨大乳一二三区,CHINESE熟女老太HD,色偷偷伊人大杳蕉综合网,热RE99久久精品国产99热

全國服務咨詢熱線:

15618996225

當前位置:首頁  >  產品中心  >  太赫茲  >  太赫茲功率計  >  Mm-Wave power meter高靈敏度毫米波功率計

高靈敏度毫米波功率計

簡要描述:高靈敏度毫米波功率計Features
0.01-220 GHz operating frequency
High sensitivity
Up to 55 dB dynamic range (0.1uW-30mW)
Small measuring time (< 1 sec)
RS-232, GPIB interface
SCPI protocol

  • 產品型號:Mm-Wave power meter
  • 更新時間:2024-09-02
  • 訪  問  量:774

產品簡介

品牌其他品牌產地類別進口
應用領域農業,電子,汽車,電氣

詳細介紹

 

高靈敏度毫米波功率計Features  
  • 0.01-220 GHz operating frequency

  • High sensitivity

  • Up to 55 dB dynamic range (0.1uW-30mW)

  • Small measuring time (< 1 sec)

  • RS-232, GPIB interface

  • SCPI protocol

高靈敏度毫米波功率計Applications  
  • Recommended for use by Rohde & Schwarz

  • Measurements of power level of mm-wave signal

  • Test equipment

Description

The DPM-xx is a single-channel average power meter for RF to millimeter wave frequencies that measures absolute power from 10 MHz to 220 GHz.

DPM-xx Power Meters display measured power in milliWatts, microWatts or dBm, and also display the user-entered signal frequency in GHz. Easy operation is ensured with automatic zeroing, automatic sensor recognition and a calculation factor table stored in the memory of each power sensor.

Their compact size, precise accuracy, reliability and inexpensive pricing make our DPM-xx Power Meters attractive assets for design engineering, equipment manufacturing, field engineering and research.

ELVA-1’s ZBD-series Zero-Biased Detectors are used as the power sensors for our DPM Power Meters.To cover the range from 10MHz to 220GHz band, we offer one coaxial (10 MHz-26.5 GHz) and 9 waveguide power sensors (26.5-220 GHz in waveguide bands), sold separay.

Based on Schottky Barrier Diode technology, our ZBD power sensors provide high sensitivity, fast measurement speed and quick response to changes of input power. To extend the dynamic range of diode power sensors above their square law region, a correction factor is used. The amplitude and frequency curves for each individually-calibrated power sensor are stored in the sensor’s EEPROM. When a sensor is connected to a DPM control/display unit, the control/display unit automatically recognizes that sensor’s characteristics. The typical curves for amplitude and frequency transfer characteristics at W-band are shown on the reverse.

Measured average power is displayed on a 2-line LCD screen, at a measurement rate of 2 times per second or faster. For power measurements below 10-100mW (depending on frequency band), each sensor is supplied with a full-band isolator. For power measurements above those levels (as high as 300mW-1Watt), optional directional couplers are available.

Every DPM-xx is equipped with an RS-232 port for control and measurement data exchange with a PC. An internal GPIB interface board is available as an added option. On special request we can also provide a dual channel power meter of DPMD-XX series with two independent measurement channels.

Since the control/display unit and power sensors are sold separay, customers only need one DPM control/display unit to interface with all 10 of our sensors. To obtain power measurements over a multi-waveguide frequency range, order one DPM control/display unit and several adjacent-band sensors.  Because the standard ELVA-1 DPM control/display unit is a single-channel meter, only one power sensor can be used at one time.

 

DPM-XX Key Features and Specifications

- Display readings: milliWatts, microWatts or dBm

- Maximum measuring rate: up to 50 times per second, default 2 times per second (set at factory)

- Frequency Range: 10 MHz to 220 GHz

- Min. measured Power: 0.1 microWatt (depending on frequency band)

- Dynamic Measurement Range: 55dB max. (depending on frequency band)

- Frequency step: 10 MHz

- SCPI or ELVA’s command protocol

- RS-232, GPIB interface

- Calibration accuracy ±0.04 dB (log) or ±1%

- Power Sensor Calibration: Individually calibrated, with amplitude and frequency curves in flash memory

- If a valid signal frequency is not entered before measuring power, maximum measurement error will be ±1.5dB for Ka, Q, U, V bands, ±2.0dB for E, W bands, and ±2.5dB for F, D bands, based on calibration curve flatness.

Model Number DPM-C DPM -28 DPM -22 DPM -19 DPM -15 DPM -12 DPM -10 DPM -08 DPM -06 DPM -05
Frequency Band Ka Q U V E W F D G
Frequency Range, GHz 0.01-26.5 14757 33-50 40-60 50-75 60-90 75-110 90-140 110-170 140-220
Input Waveguide/Impedance 50 Ohm, Coaxial WR-28 WR-22 WR-19 WR-15 WR-12 WR-10 WR-08 WR-06 WR-05
Wavequide Flange/Connector SMA, male UG-599/U UG-383/U UG-383/U-M UG-385/U UG-387/U UG-387/U-M UG-387/U-M UG-387/U-M UG-387/U-M
Dynamic Range, dB (max) 50 55 55 55 55 55 55 55 50 40
Min Measured Power Level, dBm -33 -43 -43 -43 -43 -43 -40 -40 -35 -25
Measurement Rate (default), times per sec 2 2 2 2 2 2 2 2 2 2
VSWR (power sensor) 1.2:1 1.3:1 1.3:1 1.3:1 1.3:1 1.4:1 1.4:1 1.4:1 1.4:1 1.4:1

Available operating power options: 220 VAC, 110/100 VAC, or battery power (for portable version).

 

產品咨詢

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯?dāng)?shù)字),如:三加四=7

全國統一服務電話

021-62209657

電子郵箱:sales@eachwave.com

公司地址:上海市閔行區劍川路955號707-709室

業務咨詢微信

边啃奶头边躁狠狠躁AV| 免费b站在线观看人数在哪儿找 | 欧美+日本+国产| 清纯校花的被脔日常H动漫| 日本熟妇毛茸茸| 国产老妇伦国产熟女老妇视频| 欧美在线 | 亚洲| 女人和拘做受A级毛片视频| 成人视频网站| 欧美AV蜜桃一区二区蜜桃| 不卡无码人妻一区三区音频| 亚洲精品粉嫩小泬18P| 年轻教师6电影完整版| 曰本女人与公拘交酡视频| WC凹凸撒尿间谍女厕HD| 久久久无码一区二区三区| 国产熟女老妇300部mp4| 东北妇女精品BBWBBW| 国产精品日日做人人爱| 婷婷色中文字幕综合在线| 一尘网中国投资资讯网| 久久久国产精品免费A片3D| 精品久久久久久久久久久AⅤ| 诱人的奶头BD在线观看| 玉女阁第一精品导航| 国产精品三级在线观看无码| 国产精品色情aaaaa片软件| 久久久久亚洲AV无码专区| 囯产香蕉97碰碰碰视频在线观看| 国产手机精品一区| 国产精品VA在线播放我和闺蜜| 久久精品人人做人人爽电影蜜月| 少妇高潮惨叫久久久久久| 中文字幕乱码亚洲精品一区| 锕锕锕锕锕锕~再深一点五种软件 | 老司机精品视频| 国产精品久久久久无码AV| 97人妻天天爽夜夜爽二区| 亚洲国产日韩a在线欧美2020| 久99久无码精品视频免费播放| 奶头被民工吸的又大又黑|